progressivegerma.blogg.se - Dsc alarm panel bypass zone

#Dsc alarm panel bypass zone how to
#Dsc alarm panel bypass zone code

There are many reasons you many wish to bypass a zone, which means that the system will disregard any alarms from that zone when armed. This is applicable if you use your system at home or for your business or commercial security alarm system. Why do I need to bypass a zone on my security alarm? Most keypads display all the zones that are bypassed by turning the respective zone numbers ON when bypassed and OFF when the bypass is removed from a particular zone.

#Dsc alarm panel bypass zone code

*1 OR *1 USER CODE Enters you into the system’s bypassing mode The zone numbers are always two (2) digits long that means zones 1 – 9 will be entered as zones 01 – 09. Alarm Memory What do the zone numbers mean on a DSc panel? Press # to exit bypass mode and return to Ready state.

#Dsc alarm panel bypass zone how to

The system will triple beep, and now you will enter zone 2’s definition.įor example if you wanted to bypass zone 4 your format would be: *1 04 # If you wanted to bypass zone 16 your format would be: *1 16 # If your installer programmed your system for user code bypassing your format to bypass zone 4 assuming your user code is 1234 your format would be: *1 1234 04# How to recall the last set of bypass zones?ĭSC Quick User Guide (PC1616/PC1832/PC1864) DSC7 Recalling Bypassed Zones To recall the last set of bypassed zones: 1.Now you will enter Zone 1’s 2-digit definition.Enter Section 001 (Section 001 is used for Zones 1 – 16 only….USER FUNCTION for DSCSystems Click on a topic for more information. Enter Programming by pressing ” * 8 + Installer Code “ SafeTech provides the opportunity to find alarm system technical support services.

To program your zone definitions, you must:

Press “OK” to bypass (deactivate) the sensor.

On the first line, the display will show the sensor number and name (ex: SN 1 Front Door).

Use the arrow buttons to scroll to the sensor you wished to bypass.

Press the Bypass button and enter your Master Code.

To bypass a sensor while the system is armed/arming: From the zone screen, highlight the zone you wish to remove. From the home screen, press Security > More (Lynx Touch Only) > Tools > Enter Installer Code (default is 4112) > Program > Zones.